Khoom Description

Nitinol tubing yog dov los ntawm titanium-nickel alloy (Nitinol) khoom. Nitinol muaj ob yam zoo sib xws thiab cov khoom tshwj xeeb: lub cim xeeb zoo thiab superelasticity. Peb cov titanium nickel nitinol raj feem ntau siv cov khoom superelastic ntawm chav tsev kub, thiab qhov kub ntawm Af yog qis dua 20 degree.

Daim ntawv thov ntawm Nitinol tubing:

Kev kho mob:Catheters, koob, khoom siv kho hniav, catheters, nitinol raj sib dhos, nitinol stents, pob txha cement conveyors, thiab lwm yam.
Kev siv pej xeem:sensor fasteners, yeeb nkab txuas, nco alloy rings, thiab lwm yam.

Mechanical Properties ntawm Nitinol Tubing

Qhov xwm txheej	UTS SB MPa	Elongation δ%	Upper Plateau Stress σload MPa	Active Af degree
Superelastic	>1000	Ntau tshaj los yog sib npaug rau 10	Ntau dua lossis sib npaug rau 380	<20

* Superelastic zog yog ntsuas los ntawm Test Method F2516 ntawm chav tsev kub (22+/-2 degree )
* Cov qauv siv tau: ASTM F2633

Qhov kub austenite tiav (Af) ntawm cov tube tiav nrog lub taub sab nraud nyob rau hauv thaj tsam ntawm {{{0}}}.25mm txog 7.0 hli yuav tsum ntsuas ntawm tus neeg sawv cev puv lub raj coj mus kuaj siv khoov thiab rov qab dawb Txoj kev tau piav qhia hauv Txoj Kev Xeem ASTM F 2082-15.

Nto tiav

-Sab nrauv:Dub oxide lossis Center-tsawg av.
-Sab hauv:Etched los yog oxide.

Lwm qhov kev ua tiav tuaj yeem tham nrog Chipnano

Nominal Dimensions thiab Tolerances

Nominal OD mm (hauv)	Qhov siab kam rau ua mm (hauv)
Tsawg dua los yog sib npaug rau 1.5 (0.059)	+/-0.025 (+/-0.001)
1.5	+/-0.050 (+/-0.002)
6.5	+/-0.075 (+/-0.003)

* Lwm qhov kev hloov pauv hauv OD thiab ID tuaj yeem tham txog.

Ntev
Nitinol tubing tuaj yeem xa tuaj raws li qhov ntev lossis ntev ntev. Rau qhov kev txiav txim ntev ntev, qhov siab tshaj plaws thiab qhov tsawg kawg nkaus yuav tsum tau tham.

Kev ncaj
Cov kev cai ncaj ncees thiab kev ntsuas yuav tsum tau tham txog.
Permissible Outer thiab Inner Surface Imperfections
Cov txheej txheem sab nrauv thiab sab hauv qhov tsis zoo ntawm cov raj yuav tsum tau tham.

Ordering Information ntawm Nitinol tubing

Raws li ASTM F2063-12 lossis GB 24627-2009, cov ntaub ntawv xaj lossis thov rau cov lus hais yuav tsum muaj cov ntaub ntawv hauv qab no:

- Tshuaj muaj pes tsawg leeg los yog alloy code;

-Kev hloov pauv kub rau cov khoom ntawm kev xa khoom, xws li Af

-Cov khoom siv xws li tuav, xov hlau, tubing, lossis lwm yam

-Dimensions, xws li txoj kab uas hla, OD & ID ntawm lub raj, nrog rau lawv cov kam rau ua

-Kev kho cua sov thaum xa khoom, xws li Super-elastic, Cold Worked

-Ntoo xwm txheej thaum xa khoom

-Mechanical Properties: Thaum muab xa mus rau hauv lub xeev super-elastic, lub siab siab siab, tensile zog thiab elongation yuav tsum tau teev; Thaum xa hauv lub xeev ua haujlwm txias, lub zog tensile thiab elongation yuav tsum tau teev tseg

-Quantity, xws li qhov hnyav, qhov ntev, lossis tus lej ntawm daim

Cov ntaub ntawv pov thawj

Daim ntawv pov thawj qhia tias cov khoom ua tau raws li qhov yuav tsum tau ua ntawm cov lus qhia tshwj xeeb, ntxiv rau cov ntawv xeem yuav tsum tau muab nrog cov khoom xa tuaj.
Daim ntawv ntsuam xyuas:Nyob rau hauv cov nqe lus ntawm superelastic xov hlau los yog raj, cov ntaub ntawv hauv qab no yuav tsum tau muab
- Dimension
-UAS
-Elongation
-Upper toj siab kev nyuaj siab
-Active Af los ntawm Khoov & Dawb Rov Qab
-Permanent teeb tom qab straining rau 6% strain
- Tshuaj ntsuam xyuas

Peb kuj muab lwm yam nitinol khoom xws li hlau, tiaj hlau, ntawv, sawb, ntawv ci, phaj, pas nrig, thiab machined/puab programmed nitinol qhov chaw. Nyem qhov no txhawm rau xa koj qhov kev thov.